Author Topic: Official Rebolting and Route Hardware suggestion thread  (Read 5427623 times)

mungeclimber

  • PermaBan
  • ***
  • Posts: 6665
    • http://www.sonorapassclimbing.com
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #280 on: June 09, 2014, 08:36:51 PM »
Munge - I was just trying to get all the RB info on here into one compact space so folks don't have to scroll through the entire thread - plus I removed all the fine details. You're probably right about The Thumb Reg Rte but he doesn't specify. I like the way Brad has it in the book. I need to double check ASCA and Clint's site against the book and the thread and I can add in anything I find so it's ALL in one place. I think I only saw a couple items on the ASCA list.


Cool, then overall looks good. I would title it with something to that effect. " summary of rebolting listed on mudncrud site "
On Aid at Pinns... It's all A1 til it crumbles. - Munge

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #281 on: June 12, 2014, 08:19:47 PM »
Cool, then overall looks good. I would title it with something to that effect. " summary of rebolting listed on mudncrud site "

Done - and I updated the list after going through Clint's and the ASCA records associated with the links we have.

Who do I bill for my time?
One wheel shy of normal

mungeclimber

  • PermaBan
  • ***
  • Posts: 6665
    • http://www.sonorapassclimbing.com
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #282 on: June 13, 2014, 09:00:26 AM »
me, but the coin of the land is bll.
On Aid at Pinns... It's all A1 til it crumbles. - Munge

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #283 on: June 13, 2014, 09:10:01 AM »
me, but the coin of the land is bll.

mmmmm...Mongo not know BLL ;)

Any thoughts as to "pinning" the list to the start of the sticky?
One wheel shy of normal

mynameismud

  • unworthy
  • Posts: 5974
    • Mudncrud
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #284 on: June 13, 2014, 12:03:00 PM »
not sure how to make a mid post the top.  will have to look into it
Here's to sweat in your eye

F4?

  • unworthy
  • Posts: 6172
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #285 on: June 13, 2014, 06:02:49 PM »
Copy.......paste?

Wait, you are a Unix guy.....never mind
I'm not worthy.

mynameismud

  • unworthy
  • Posts: 5974
    • Mudncrud
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #286 on: June 13, 2014, 09:10:25 PM »
this is database stuff and I am now a windoze guy, or something like that.
Here's to sweat in your eye

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #287 on: July 01, 2014, 01:58:06 PM »
Does anyone know who the Merry Cranksters were/are? They are listed as rebolting 50 Meter Must.
One wheel shy of normal

Brad Young

  • Grand Master
  • ***
  • Posts: 6683
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #288 on: July 01, 2014, 06:55:22 PM »

Does anyone know who the Merry Cranksters were/are? They are listed as rebolting 50 Meter Must.


Kelly Rich can answer that (Adam probably can too).

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #289 on: July 01, 2014, 08:04:36 PM »
Kelly Rich can answer that (Adam probably can too).

I should have known Atom was involved! As long as they were not hanging out with Ken Kesey when they did the rebolting ;)
One wheel shy of normal

clink

  • Meanderthal
  • ****
  • Posts: 4012
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #290 on: August 24, 2014, 06:09:32 PM »
I replaced a crappy 3inch wedge anchor today on the arete right of What I've Been Missing Out On. It failed due to bad rock, and pulled quite easily. Much better rock 20inches higher allowed for a solid 3 3/4 double wedge SS.

 Now to make a tuning fork. And get on a outing with the masters.
Causing trouble when not climbing.

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #291 on: August 24, 2014, 06:22:44 PM »
I replaced a crappy 3inch wedge anchor today on the arete right of So This is What I've been  Missing. It failed due to bad rock, and pulled quite easily. Much better rock 20inches higher allowed for a solid 3 3/4 double wedge SS.
Now to make a tuning fork. And get on a outing with the masters.

Good work clink - I know you have been wanting to do that for quite some time.

Greg Barnes can hook you up with tuning forks - I have a couple and need to get back to some rebolt work soon.

I would have gotten some stuff replaced this summer if not for all this new work.

Classes start tomorrow :)


One wheel shy of normal

Bruce Hildenbrand

  • Moderator
  • *****
  • Posts: 257
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #292 on: September 01, 2014, 08:30:16 PM »
JC,

if you want as complete a list as possible of all the rebolting activities at Pinnacles then you need the FOP master list.  It is just about up to date and includes 120 routes and 400+ bolts.  In addition FOP has added chains/links for rappel on 99 routes.   Activity on the list dates back to the early 90's.

Bruce

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #293 on: September 02, 2014, 06:35:02 AM »
JC,

if you want as complete a list as possible of all the rebolting activities at Pinnacles then you need the FOP master list.  It is just about up to date and includes 120 routes and 400+ bolts.  In addition FOP has added chains/links for rappel on 99 routes.   Activity on the list dates back to the early 90's.

Bruce

Thanks Bruce. I actually went through the list FOP/Clint has online and cross-checked it with the guidebook to make the listing I posted on here. That's assuming it is the master list. Maybe you and I can catch up at the trail day in October :) 
One wheel shy of normal

Atomizer

  • Atomized
  • *
  • Posts: 836
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #294 on: September 02, 2014, 09:14:41 AM »
Kelly Rich can answer that (Adam probably can too).

hahahahahahhahah!
The Merry Cranksters!!!!
I forgot about us.

Bruce Hildenbrand

  • Moderator
  • *****
  • Posts: 257
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #295 on: September 02, 2014, 02:19:41 PM »
JC,

your list has about 40 routes.  The FOP master list has over 120 routes.   So, if your list is intended to be some sort of list of all the rebolted routes in the Pinnacles I would say that it is incomplete.

Bruce

Edit- OK so I think I figured it out.  The list JC put together is of existing routes in Brad's guidebook that have out of date rebolting information.

mungeclimber

  • PermaBan
  • ***
  • Posts: 6665
    • http://www.sonorapassclimbing.com
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #296 on: September 02, 2014, 03:36:40 PM »
where is the master list posted Bruce?
On Aid at Pinns... It's all A1 til it crumbles. - Munge

Bruce Hildenbrand

  • Moderator
  • *****
  • Posts: 257
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #297 on: September 02, 2014, 05:39:48 PM »
where is the master list posted Bruce?

Munge,

I don't think it is posted anywhere.  I gave Clint a copy probably 8-10 years ago which is reflected in the list on his Stanford web page.  The list has five sections - 1) FOP rebolting 2) FOP adding chains/links to anchors 3) FOP removed extraneous bolts 4) FOP replaced bad hangers on good bolts 5) unknown rebolting.  One of these days we should probably post it somewhere.

JC w KC redux

  • Moderator
  • *****
  • Posts: 6576
  • my density has brought me to you...
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #298 on: September 02, 2014, 07:47:05 PM »
where is the master list posted Bruce?

Rob,
I spent hours combing through Clint's list, the ASCA list, this thread and the guidebook. My list on page 3 of this thread has everything from all of those sources that is not already in the guide book. You'd have to pay me to do it again.

It was a love hate thing and partly selfishly motivated. :)

 
One wheel shy of normal

mungeclimber

  • PermaBan
  • ***
  • Posts: 6665
    • http://www.sonorapassclimbing.com
Re: Official Rebolting and Route Hardware suggestion thread
« Reply #299 on: September 02, 2014, 08:44:32 PM »
Ok, so it sounds like there should be no gap.
On Aid at Pinns... It's all A1 til it crumbles. - Munge