BTW- that third bolt was truly a convenience:-) It also seemed solid so I assume you and/or Brad fixed it.
No we did nothing to "fix" the first-placed/lowest bolt at the second belay. It went in OK and tightened down well. Overall, after it was placed it felt fine. But I knew that the hole wasn't up to my standards as a belay bolt; I didn't like it. Maybe I was being too cautious, but I put in two bolts that I was definitely comfortable with instead.
And J.C., yes, I probably should add that Desperate Abandon belay bolt to the topo, it would fit. Originally I didn't put it there because it didn't seem to fit in it's proper place (a common problem in depicting a three dimensional area in a two dimensional drawing). But in looking at it again, I disagree with myself - it would likely fit. Putting a third bolt on the second pitch belay would make it crowded, but is doable too. If I ever finalize and clean up the topo (unlikely but possible) I will make those changes.